Aria Child Asana 35 User Manual page 37

To remove base, open the Firm
Fit arm, then push button on LATCH
connectors then unhook from the
anchor point.
You may need to loosen the
tension on the LATCH connector by
loosening the LATCH adjustment strap.
Repeat steps as shown on the
other side of the base.
Pass LATCH strap under the base
through the openings into the
LATCH storage pockets as shown.
When storing, place the LATCH strap
underneath the LATCH storage tab
(see pg 34). To do so, Open FirmFit
Arm and slide LATCH strap under tab.
When storing, NEVER allow strap to
lie on top of the base area as it might
interfere with the car seat latching to
the bars on the base.
15
LATCH strap MUST pass
16
under the base
37
Underside of base