Aria Child Asana 35 User Manual page 44

Base Installation with Lap Belt (cont.)
CHECK the recline indicator to make
sure the base is correctly reclined.
If it is not correctly reclined, unlock
the FirmFit arm, unbuckle lap belt,
and adjust the foot on the base then
re-install base. CHECK that the base
is correctly reclined. Refer to pages
52-54 for Adjusting the Recline.
Attach the carrier into the
base until you hear a click.
Finish the load leg installation from
pages 20-23.
WARNING
Lift up on the handle of the
ADVERTENCIA
carrier to make sure that it is
securely attached in the base.
ALWAYS lift up on the carrier
to check that it is securely
attached to base.
7
8
9
44
CLICK!