Aria Child Asana 35 User Manual page 35

Close the FirmFit arm until it locks
into place and you see GREEN in the
indicator window on the base.
CHECK to make sure base is secure
by holding both sides of the base
near the LATCH strap and moving it
from side to side and front and back.
The LATCH belt should not loosen
and the base should not move
easily. The base should not move
more than 1 inch (2.5 cm) from side
to side or front to back.
CHECK the recline indicator to make
sure the base is correctly reclined.
If it is not correctly reclined, remove
LATCH connectors, unlock the
FirmFit arm and adjust the foot on the
base then re-install base. CHECK
that the base is correctly reclined.
Refer to pages 52-54 for Adjusting
the Recline.
8
9
4
5
10
4
5
11
35
CLICK!