KTI Networks KS-2260 Operation Manual page 96

The following MIB-2 objects are related to the switched ports and are
indexed by a port number 1 ~ 27 (27 = CPU port):
Port MIB-2 Objects
ifIndex.1 ~ 27
ifDescr.1 ~ 26
ifDescr.27
ifType.1 ~ 27
ifSpeed.1 ~ 24
ifSpeed.25 ~ 26
ifSpeed.27
ifAdminStatus.1 ~ 27
ifAdminStatus.1 ~ 27
ifOperStatus.1 ~ 27
ifLastChange.1 ~ 27
ifInOctets.1 ~ 27
ifInUcastPkts.1 ~ 27
ifInNUcastPkts.1 ~ 27
ifInDiscards.1 ~ 27
ifInErrors.1 ~ 27
ifOutOctets.1 ~ 27
ifOutUcastPkts.1 ~ 27
ifOutNUcastPkts.1 ~ 27
ifOutDiscards.1 ~ 27
ifOutErrors.1 ~ 27
ifOutQLen.11
Set/Get Value Options
Get Physical port number
Get text - Port 1~26 on unit 1
Get text - ethernet switch low driver
Get erhernet-csmacd(6)
Get 100000000=100M, 10000000=10M
Get 100000000=100M, 10000000=10M
1000000000=1000M, 0=No module
Get 10000000 = 10M
Set up(1) = enable port
down(2) = disable port
Get up(1) = port is enabled
down(2) = port is disabled
Get up(1) = port status link up
down(2) =port status link down
Get Time of port status change
Get Port total bytes received
Get Port total unicast packet received
Get Port total non-unicast packet received
Get Port total packet dropped
Get Port total error packet received
Get Port total bytes sent
Get Port total unicast packet sent
Get Port total non-unicast packet sent
Get Port total packet aborted
Get Port total error packet sent
Get Port total output queued packets
-96-