Table of Contents
Advertisement
2.7.2 Setup for In-band Management
To perform an in-band management, it is necessary to connect the sys-
tem to your TCP/IP network. The steps are:
1. Configure IP and SNMP related settings to the device using direct
console management when you receive it first time for the installa-
tion.
2. Find a proper straight-through Category 5 UTP cable (maximal length
100 meters) for the connection.
3. Connect one end of the UTP cable to the UTP port of the media
converter and connect the other end to a network device, such as a
switching hub, in your TCP/IP network.
4. Start your in-band management operations. For different manage-
ment methods, refer to:
•
Chapter 3 for Console and Telnet management
•
Chapter 4 for SNMP management
•
Chapter 5 for Web management
2.7.3 Quick Guide to Configure Switch IP Address
This section provides a quick instruction to configure a new IP address
via Console port for the switch received for the first time. The steps are:
1. Set up console connection as described in section 2.7.1.
2. Login with default username= admin and password=123.
3. Menu selections to enter IP configuration as follows:
Main Menu
-> Switch Static Configuration
-> Administration Configuration
-> IP Configuration
-41-
Advertisement
Table of Contents
