Perport Configuration
----------------------------------------------------
Managed 24+2G Switch : STP Port Configuration
Port
---------------------------------------------
PORT1
PORT2
PORT3
PORT4
PORT5
PORT6
PORT7
PORT8
action-> <Quit> <Edit> <Save> <Previous Page> <Next Page>
----------------------------------------------------
PortState : Spanning tree port state status
Possible states - Forwarding, Blocking, Listening, Learning
Control settings:
PathCost : Specifies the path cost for each port. The possible range is 1
to 65535. The recommended path cost is 1000 divided by LAN speed in
megabits per second.
Priority : Specify STP port priority for each port. The possible priority
range is 0 through 255 (decimal). The default is 128. If all ports have the
same priority value, the lowest port number forwards the spanning-tree
frames.
For descriptions of STP status and parameters, refer to Chapter 1 - Span-
ning Tree Protocol section.
PortSate
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
Forwarding
PathCost
1 0
1 0
1 0
1 0
1 0
1 0
1 0
1 0
-74-
Priority
128
128
128
128
128
128
128
128