If 802.1Q mode is selected, some additional settings are required as follows:
----------------------------------------------------
Managed 24+2G Switch : VLAN Support Configuration
VLAN Mode : 802.1Q
Port
PVID
------------------------------------------------------------------
PORT1
1
PORT2
3
PORT3
1
PORT4
1
PORT5
1
PORT6
1
PORT7
1
PORT8
1
action->
<Quit>
------------------------------------------------------------------
Tab=Next Item BackSpace=Previous Item Quit=Previous Menu Enter= Select Item
-------------------------------------------------------------------------
Per port control settings:
PVID : Port VID
Optional values - 1 ~ 255
Ingress Filter / NonMember Drop: Drop or forward input VLAN tagged
frames whose VID does not match PVID associated to the input port.
This rule is applied only when input port is not the member port of the
associated VLAN group. Setting options - DROP, FORWARD
Ingress Filter / UnTagged Drop: Drop or forward input untagged frames
Options - DROP, FORWARD
IngressFilter1
NonMember Drop
FORWARD
FORWARD
DROP
DROP
DROP
DROP
DROP
DROP
<Edit>
<Save>
-51-
IngressFilter2
Untagged Drop
DROP
FORWARD
FORWARD
FORWARD
FORWARD
FORWARD
FORWARD
FORWARD
<Previous Page> <Next Page>