KTI Networks KS-2260 Operation Manual page 73

Current spanning tree information about the Root Bridge is shown on the
left side and new values for STP parameters are configured on the right
side.
The settings are:
Priority : The priority is assigned to the switch. The higher value is
lower priority. Range: 0 - 65535
Max Age : The number of seconds a bridge waits without receiving
Spanning Tree protocol configuration messages before attempting a
reconfiguration. Valid value : 6 ~ 40.
Hello Time : The number of seconds between the transmission of Span-
ning Tree protocol configuration messages. Valid value : 1 ~ 10.
Forward Delay Time : The number of seconds a port waits before chang-
ing from its Spanning Tree Protocol learning and listening states to the
forwarding state. Valid value : 4 ~ 30.
For descriptions of STP status and parameters, refer to Chapter 1 - Span-
ning Tree Protocol section.
-73-