KTI Networks KS-2260 Operation Manual page 33

The following 100FX modules are supported by F23 and F24 slots:
Part Number Connector
2260-FMT Duplex ST
2260-FMC Duplex SC
2260-FJM MT-RJ
2260-FVM VF-45
2260-FSA2 Duplex SC
Note:
* MMF - Multimode Fiber cable 50/125, 62.5/125 mm
* SMF - Single Mode Fiber cable 8.7/125, 9/125, 10/125 mm
Specifications
IEEE 802.3u 100BASE-FX compliant, Fixed 100Mbps, Fixed Full duplex
Optical Specifications
Part Number Wavelength Output Power
2260-FMT 1310nm
2260-FMC 1310nm
2260-FJM 1310nm
2260-FVM 1310nm
2260-FSA2 1310nm
Installation steps:
1. Turn the power to the switch off.
2. Set JP1.
3. Insert the 100FX modules and screw the modules securely.
4. Turn the power to the switch on.
Cable Distance
MMF* 2 km
MMF 2 km
MMF 2 km
MMF 2 km
SMF* 20 km
-19 ~ -14dBm
-19 ~ -14dBm
-20 ~ -14dBm
-20.5 ~ -15dBm
-18 ~ -7dBm
-33-
Input Optical Power
-31dBm min. -14dBm max.
-31dBm min. -14dBm max.
-31dBm min. -14dBm max.
-33dBm typ. sensitivity
-32dBm max. sensitivity