Table of Contents
Advertisement
3. Mount two device units as one in a 19" rack.
2.4 Installing Power Module
If you purchased 2 Power Model, you may skip this section. 1 Power Model can deliver total up to
60W for consuming by all eight ports. Calculate the total power budget required for your PD
connections before making any connections.
Most of common PoE powered devices such as wireless Access Points, VoIP phones, IP cameras and
media converters consume power less than 5Watts. However, refer to the product technical
information of individual PD you are using for the power consumption.
If total PoE power more than 60W is required, install one extra power module to the 1 Power injector.
The steps are:
1. Unplug the AC power cord before any installation.
2. Open the cover of the empty module slot.
12
Advertisement
Table of Contents
