Introduction; Purpose - KNS Ku-BAND TX Installation And Operation Manual

1. Introduction

1.1

Purpose

The purpose of this manual is to provide the information required to enable the end user,
customer and installer to successfully install the VS61 antenna and controller and to
program the KA-160 for operation.
It is recommended that all personnel operating the VS61 systems know which type of
system they are dealing with, read and understand the basic terms, and are fully familiar
with the operation of these systems.
Although installation may be completed by personnel preferred or designated by the
customer, it is also recommended that personnel be trained in the SAMYUNG ENC for
more suitable equipment installation procedures, and trained by SAMYUNG ENC Inc.
experts in the relevant matters.
Section 2 of this document has been provided to ensure that ALL personnel are aware of the
specific safety hazards involved in the installation and configuration of the SAMYUNG ENC
equipment (e.g. electrical, static and RF radiation hazards).
1