Str Id (Key '▲') - KNS Ku-BAND TX Installation And Operation Manual

7.1.12
With this configuration, the operator can select a different S&T Ref. ID. When selecting
an S&T reference, the antenna starts the searching and tracking processes as per the
parameters based on the selected STR. If the new STR uses a different satellite, then
the antenna will search for a different satellite.
For example, let's assume that there are two fully-configured records of the STR, i.e.
01:SMX5 (Satmex-5) and 02:NSS7 (NSS7). If the antenna is using STR 01:SMX5 and
the operator selects 02:IA07, then the antenna will search and track the NSS-7 satellite as
per the details of STR record 02:NSS7. To use this option effectively, it is recommended
that the operator configures multiple records of the Searching and Tracking Reference
(STR) in advance for multiple satellites.
NOTE: The operator can change the satellite's name using the ACU key pad. Refer to Figure
7-18 below if you wish to change the satellite's name.
STR ID (Key '▲')
Figure 7-19 Configuration of STR ID
75