Temp S&T Reference Test (Key '7') - KNS Ku-BAND TX Installation And Operation Manual

7.1.8 Temp S&T Reference Test (Key '7')
With this configuration, the operator can evaluate all of the S&T references and choose
the best one. The operator can see simultaneous readings of all the S&T references, and
select any one of the pre-configured S & T references as an active reference (so that it
can be used in the searching and tracking process), and then enters its AGC threshold
level.
Figure 7-15 Configuration Temp S&T Reference
' '
' '
' '
' '
' '
C:L/U DVB Tuner lock status
72