Yaw Axis Initialize (Key '8'); Searching On/Off (Key '+/-') - KNS Ku-BAND TX Installation And Operation Manual

7.1.9 Yaw Axis Initialize (Key '8')

This configuration is required when the gyro is in need of repair.
7.1.10
Searching OFF is a special function to prevent the antenna from going into the
searching process when a searching problem occurs, such as a tracking failure.
The Searching OFF function is very useful when there are frequent blockages of short
duration. If you select Searching ON, any blockage (up to searching delay) causes the
antenna to go searching wherever the searching pattern has been initiated.
L = Locked
U = Unlocked
External device lock status
E:L/U L = Locked
U = Unlocked
A: XXXX DVB AGC Level
C:XXXX DVB C/N Level
R:XXXX RSSD Level
E:XXXX External device AGC Level
Figure 7-16 Yaw Axis Initialize Configuration

Searching ON/OFF (Key '+/-')

' '
' '
73