Reading Instructions - Bang & Olufsen BEOLINK Handbook

MASTER CONTROL LINK

READING INSTRUCTIONS

The hardware (plugs, cables, X-tra kits, etc.) used for connecting Bang &
Olufsen's products into a system is always the same, no matter if it is a
Beocenter 9500 and an MX 6000 that have to be connected or if it is a
Beomaster 7000 and an MX 6000, for example.
The handbook employs various symbols to illustrate audio products, video
products and speakers. Unless otherwise stated in the text, these symbols
merely have to be understood as covering one of these product areas and
not as the specific product which the illustration may depict.
Since the handbook is focusing particularly on the basic rules in
connection with the installation of the systems, variables which are
specific to particular products have been omitted to the greatest possible
extent. This means that the handbook will always be relevant in
connection with installation of Master Control Link Systems and AV
systems; both with regard to products launched prior to the publication
of the handbook and products that will be launched later.
Because the basic rules applying to the AV and Master Control Link
Systems will always be the same.
If information specific to a particular product is required, please see Bang
& Olufsen's Product Configuration Guide.
1