Beosystem 2300/2500 With Mcl; Main Room; Link Room - Bang & Olufsen BEOLINK Handbook

Beosystem 2300/2500 with MCL

MASTER CONTROL LINK
Moreover, the above-mentioned Option 4 can be used if a Link room and
the Main room are located in such a way that both rooms will be
operated simultaneously. By setting the Link room to Option 4, the room
can be operated independently of the Main room, because the Link room
which is set to Option 4 will only accept information from the terminal if
the LINK key has been actuated.
NOTE!!
The X-tra TV kit CANNOT be set to Option 4!
Option 4 CANNOT be used between two link
rooms!
Beosystem 2300/2500 do not have a built-in output amplifier, and
consequently a BeoLink System cannot be immediately connected to a
Beosystem 2300/2500.
If a BeoLink System is to be connected to a Beosystem 2300/2500, the
solution shown below must be employed. (MCL 2P is used as output
amplifier).
23