Table of Contents
Advertisement
Content
Application
Miscellaneous
REMEMBER
MASTER CONTROL LINK
X-TRA ACTIVE SPEAKER KIT
The X-tra active speaker kit contains an MCL 2AV panel, a transceiver, a
mains adaptor, a Beolink 1000 wall fixture as well as fittings for
installation.
The X-tra active speaker kit is used in those rooms where you wish to have
sound through active speakers. The mains adaptor supplies power to the
MCL 2AV panel. The Beolink 1000 wall fixture is intended as a storage
place for the remote control terminal.
In addition to using the centrally placed audio and video systems via the
X-tra active speaker kit, it is possible to connect local sources (CD player
and tape recorder) to the MCL 2AV panel. Connection of local sources
allows you to listen to a CD player or a tape recorder independently of
the centrally placed products.
The X-tra active speaker kit has built-in "volume control". This volume
control permits you to reduce the volume in the link room without
affecting the volume in other rooms. The volume can be increased by 12
dB in the link room without affecting the volume in other rooms. If the
volume is increased further, the volume in other rooms will be increased
comparatively.
In addition to the content of the X-tra kit and the active speakers, some
MCL cable and perhaps some plugs and connection boxes are required.
(See the section on installation types, page 27, for further information, if
required.)
When planning an installation, remember that both the active speakers
and the MCL 2AV panel have to be connected to the mains.
7
Hide quick links:
Advertisement
Table of Contents
