Setups With Light Control - Bang & Olufsen BEOLINK Handbook

24
MASTER CONTROL LINK

SETUPS WITH LIGHT CONTROL

The BeoLink System allows operation and enjoyment of a centrally placed
audio and video system from different rooms in the house.
Furthermore, the light in the entire house may be controlled via the
BeoLink System. You may sit in any room in the house and control the
light in the rest of the house (link light control). This can be done either
by means of the Beolink terminal or through timer programming.
Up to nine Light Controls can be connected in each room. A condition for
achieving link light control is that the transceivers in the setups are set to
transmitting link light commands. This setting is programmed in the
following way:
First ensure that the entire system is in stand-by.
While pressing the "TIMER" key on the transceiver, enter a digit (1, 2, 3 or
4) into the Beolink terminal.
Each digit must not be repeated more than four times.
Link light control can also be transferred via Beovision. Beovision are set
by the factory to transferring link light control, and no additional
programming in connection with light control is therefore required.
Link light control is not possible with all audio systems, please refer to
Bang & Olufsen Product Configuration Guide for specific information of a
particular product.