Placing Of Mcl 2Av Panel; Central Placing Of Relay Boxes And Mcl 2Av Panel - Bang & Olufsen BEOLINK Handbook

Placing of MCL 2AV panel

Central placing of relay boxes
and MCL 2AV panel
MASTER CONTROL LINK
The socket panel may be placed inconspicuously, e.g. at the skirting of a
wall.
The socket panel is not designed to function at temperatures above 40°C
or below 10°C.
Due to the cable length, it must be placed within reach of an AC outlet
and local sources, if any.*
* This applies to active speakers, too.
As appears from the illustration, relay boxes and panels can be placed in a
central location. (However, maximum cable lengths must not be
exceeded, and the same applies to maximum and minimum ambient
temperatures. See the section on dimensioning for further information, if
required).
Possible advantages of a central placing could be that the MCL units are
easier to hide, MCL 2AV panels could use a joint current output, etc.
31