Bang & Olufsen BEOLINK Handbook page 37

34
X-tra TV kit
Trouble
Use of the TV as an independent TV
is OK but operation of the centrally
placed system from the link room is
not possible.
Poor TV picture, no v.tape and/or
satellite picture. Operation of
centrally placed system is OK.
When operating the system in a
link room, other link rooms
and/or the main room are
activated.
MASTER CONTROL LINK
Possible cause
A) The MCL 2AV panel is not connected to the mains.
B) The AV cable between the MCL 2AV panel and the TV is not mounted
or it is disconnected.
C) The MCL cable is not mounted or it is mounted incorrectly in the
Beomaster.
Check that the L & R
Beomaster.
White lead = right (R)
Black lead = left (L)
D) The data lead (white) in the MCL cable is disconnected or short
circuited.
(Check terminal strip.)
E) Error in MCL 2AV panel or mains adaptor.
A) The video tape recorder in the main room is not connected to the
mains.
(The modulator is therefore not in operation.)
B) The video distribution has not been executed correctly.
(Check that output and input have been connected correctly in the
video distributer.)
A) The information from the terminal can be "seen" from the other
rooms, which are then activated.
(See the section on placing of transceiver, or use "Option 4" as
described in the section on special setups.)
speaker plugs are properly mounted in the