Table of Contents
Advertisement
Visible installation.
MASTER CONTROL LINK
INSTALLATION TYPES
The following section gives a brief introduction to two typical installation
types, namely the visible and the invisible installation. The examples will
also include various applications of Bang & Olufsen's installation
accessories, which are shown at the end of the handbook.
The illustrations give only a few installation examples. There are many
alternatives, of course.
A visible installation is used where it is not possible to hide cable and
installation materials in the attic and/or in conduits in the wall.
The illustration shows a visible installation, executed according to the
loop-through principle.
In this example the following has been used:
1. 1 x MCL cable with two plugs
2. 1 x datalink cable
3. 1 x X-tra speaker kit
4. MCL cable by the metre
5. 1 x X-tra active speaker kit
6. Furthermore, various speaker cabling is required, depending on the
type of speaker.
The illustration shows a visible
installation, executed according to
the star distribution principle.
In this example the following has
been used:
1. 1 x MCL cable with two plugs
2. 1 x Connection box
3. MCL cable by the metre
4. 2 x datalink cable
5. 1 x X-tra speaker kit
6. 1 x X-tra TV kit
7. Furthermore, various speaker
cabling is required, depending
on the type of speaker.
27
Hide quick links:
Advertisement
Table of Contents
