Home Theater Master MX-500 Operating Manual page 27

Lcd screen preprogrammed and learning remote control

Hide thumbs Also See for MX-500:

mode.

button exit to main erase mode.

button once again to exit the SETUP

C. Erasing Macro Functions

1. Erase Ml- M3, Power And System Off Buttons

1. Go to the program setting mode by pressing both

R buttons simultaneously for

three seconds.

2. Press the

utton.

3. Press the

button to erase MACRO

button(s).

4. If you wish to erase all the Macro buttons in the

MX-500TM, press the ALL button and then press the

button at the next LCD screen. If you wish

a single macro button at a time, press the

REY button.

5. Press one of the MACRO button (Ml -M3, Power

and System Off) you wish to erase the macro functions.

AIN button to exit to main erase

mode. Press the &I

button once again to exit the

SETUP mode.

2. Erase Macro Functions in The Ten Device Buttons

1. Enter the programming mode by pressing the

and ALAR

buttons simultaneously for three

seconds.