Home Theater Master MX-500 Operating Manual page 23

Lcd screen preprogrammed and learning remote control

Hide thumbs Also See for MX-500:

3. Press one of the ten device buttons you wish to

program for macro functions.

4. Select the device by pressing device button and then

press the functional buttons you wish to store in the

device macro button you selected. You can store up to 20

commands into the device macro buttons.

5. Save the comm.ands you selected to the macro button

by pressing the

button.

6. Repeat from

to program other device button.

Once you complete the prog

ing and wish to exit

from this mode, press the

button. Exit from SET

UP mode by pressing the

utton once again.

Note: Pressing the PAUSE button during the macro

programming will add a time delay of 0.2 seconds

between the commands. E.g. Pressing the PAUSE button

twice will create a pause of 0.4 seconds between the

commands where the delay was inserted.