Home Theater Master MX-500 Operating Manual page 25

Lcd screen preprogrammed and learning remote control

Hide thumbs Also See for MX-500:

A. Erasing Learned Buttons

1. Go to the program setting mode by pressing both the

R buttons simultaneously for three

seconds.

2. Press the

button.

3. Press the LEA

button to erase learned button(s).

4. If you wish to erase all the learned functions in MX-

500TM, press the ALL button and then press the S

button at the next to the LCD screen. If you wish to erase

all the buttons in a single device or an individual button

in the device, press the ~~~~~~ button.

Tip) To erase the learnedfunction in the device button

i&e& press the PAGE button and then press the device

button (rr! VCR, Audio, etc.).

5. Press the device button (TV, VCR, Audio, etc.) to

erase the button(s) from the device.

6. Press the ALL button if you wish to erase all the

learned buttons in the device and press the SU

button at the

to the LCD screen.

7. Press the

if you wish to erase individual buttons

in that device one at a time. This will show all the

functions in the device. Press the button you wish to erase.