Home Theater Master MX-500 Operating Manual page 21

6. Once you completed the programming and wish to
exit from the FAVORITE CHANNEL mode, press the
button. Exit from SET UP mode by pressing the
button once again.
Note: There are five pages of LCD screens for favorite
channel programming. You move to other pages by
pressing the PAGE or FAV button.
There are two types of macro functions you can program
with the MX-500TM.
l
The Ml, M2 and M3, Power and System Off buttons
are designed to send out up to twenty commands
from each of the five hard buttons.
l
The ten device buttons on the Main menu can send
out up to twenty commands from each device button
when the device button is pressed for more than 1
second.
A. Programming Macro Functions to Ml- M3, Power
and System Off Buttons:
1.
an
o th'e programming mode by pressing the
TER button simultaneously for three set