Home Theater Master MX-500 Operating Manual page 15

Lcd screen preprogrammed and learning remote control

Hide thumbs Also See for MX-500:

4. Press the device you wish to program.

(E.g. To program TV, press the TV button).

5. Select the device from which the scanned code

table will be selected. (E.g. If it is the TV code

table, press the TV device button).

6. Point the remote control toward the component

and press either the

0rD

button on the

LCD. (It will send out the series of Power codes

when the button is kept pressed and the,code

number that are being sent are shown on the LCD).

If the right code number is sent, the component will

turn off right after the code number is transmitted.

7. Release the UP or

pressing as soon as th

8. Confirm that it is the right code by pressing

Power button. After the confirmation that the

code is entered, save the code by pressing the

button on the LCD. Later you may want to try other

code numbers for your component to see which one

includes the most functions appropriate for your device.

9. Exit from Preprogrammed mode by pressing the

AEN button and then exit from SET UP mode by

pressing the ~A~

button once again.