South Bridge Configuration - DFI PT630-NRM User Manual

3
BIOS Setup

South Bridge Configuration

South Bridge Chipset Configuration
USB Function
EHCI Controller#1
EHCI Controller#2
GbE Controller
GbE LAN Boot
GbE Wake Up From S5
HDA Controller
After G3
PCIE Ports Configuration
On Board LAN2
On Board LAN3
On Board LAN4
USB Function
Enables or disables the USB controller.
EHCI Controller#1 and EHCI Controller#2
This field is used to enable or disable the Enhanced Host Controller Interface
(USB 2.0).
GbE Controller
Enables or disables the Gigabit LAN controller.
GbE LAN Boot
Enable this field if you want to use the boot ROM (instead of a disk drive) to
boot-up the system and access the local area network directly. If you want to
change the boot ROM's settings, type the <Shift> and <F10> keys simultaneous-
ly when prompted during boot-up. Take note: you will be able to access the boot
ROM's program (by typing <Shift> + <F10>) only when this field is enabled.
GbE Wake Up From S5
When enabled, it allows the network LAN to wake up the system from S5.
HDA Controller
Enables or disables the High Definition Audio controller.
94
BIOS SETUP UTILITY
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Power On]
[Auto]
[Auto]
[Auto]
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Chipset
Enable/Disable USB
controller in system.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit