Ahci Configuration - DFI PT630-NRM User Manual

AHCI Configuration

This section is used to configure AHCI.
Advanced
AHCI Settings
AHCI BIOS Support
AHCI Port0 [Not Detected]

AHCI Port1 [Not Detected]

AHCI Port2 [Not Detected]

AHCI Port3 [Not Detected]

AHCI Port4 [Not Detected]

AHCI Port5 [Not Detected]

AHCI BIOS Support
Enable this field to allow the AHCI controller to operate in AHCI mode during
BIOS control otherwise it will operate in IDE mode.
BIOS SETUP UTILITY
[Enabled]
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS Setup
Enables for supporting
AHCI controller operates
in AHCI mode during
BIOS control otherwise
operates in IDE mode.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3
71