DFI PT630-NRM User Manual page 92

3
BIOS Setup
Memory Remap Feature
Enabled
Allows remapping of overlapped PCI memory above the total physical mem-
ory.
Disabled
Does not allow remapping of memory.
DRAM Frequency
Selects the frequency of the DRAM.
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
IGD Graphics Mode Select
Selects the amount of system memory used by the internal graphics device.
PEG Port
The options are Auto and Disabled.
PEG Force GEN1
Some PCIE graphics devices does not comply to the PCIE specification and may
incorrectly report their Gen capability or link width. Select Enabled to force the
graphics device in Gen 1 mode.
92