Super Io Configuration - DFI PT630-NRM User Manual

3
BIOS Setup

Super IO Configuration

This section is used to configure the I/O functions.
Configure F71879F Super IO Chipset
Onboard Floppy Controller
AC Power Loss
Case Open
Onboard Floppy Controller
Enabled
Enables the onboard floppy disk controller.
Disabled
Disables the onboard floppy disk controller.
AC Power Loss
Off
When power returns after an AC power failure, the system's power is off. You
must press the Power button to power-on the system.
On
When power returns after an AC power failure, the system will automatically
power-on.
Former-Sts
When power returns after an AC power failure, the system will return to the
state where you left off before power failure occurs. If the system's power
is off when AC power failure occurs, it will remain off when power returns.
If the system's power is on when AC power failure occurs, the system will
power-on when power returns.
Case Open
Set this field to Enabled to allow the system to alert you of a chassis intru-
sion event.
64
BIOS SETUP UTILITY
Advanced
[Enabled]
[On]
[Disabled]
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Allows BIOS to Enable or
Disable Floppy Controller.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit