Remote Access Configuration; Serial Port Number; Serial Port Mode; Flow Control - DFI PT630-NRM User Manual

Remote Access Configuration

This section is used to configure the remote access.
Advanced
Configure Remote Access Type and Parameters
Remote Access

Serial Port Number

Base Address, IRQ

Serial Port Mode

Flow Control

Redirection After BIOS POST

Terminal Type
VT-UTF8 Combo Key Support
Sredir Memory Display Delay
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Remote Access
Enables or disables the remote access feature.
Serial Port Number
Selects the serial port.
Base Address, IRQ
Selects an IRQ for the serial port.
Serial Port Mode
Selects a mode for the serial port.
Flow Control
Selects the flow control for console redirection.
Redirection After BIOS POST
Boot Loader
Redirection is active during POST and during Boot Loader.
Always
Redirection is always active. Some OSes may not work when this field is set
to Always.
Disable
Turns off the redirection after POST.
BIOS SETUP UTILITY
[Enabled]
[COM3]
[D000h, 5]
[115200 8, n, l]
[None]
[Always]
[ANSI]
[Enabled]
[No Delay]
BIOS Setup
Select Remote Access
type.
Select Screen
← →
Select Item
↑↓
+ -
Change Option
F1 General Help
F10 Save and Exit
ESC Exit
3
75