Operation; Log On And Off At The Cash Register; Log On With Key; Log On Without Key - Vectron POS ColorTouch User Manual

16
7

Operation

This chapter gives an overview on the functions of your Vectron POS
ColorTouch and an introduction into the basic operating procedures.
Your Vectron dealer has programmed your POS system to meet your
operating requirements. Because of this some operating procedures
may differ from those described in this manual. Your Vectron dealer
will fully explain the functions installed for you.
7.1

Log on and off at the cash register

The clerk must log on to the Vectron POS ColorTouch in order to enter
PLUs or hold-buffers. Thus you can verify at any time which clerk
has made which entries. Different users can be vested with different
authorizations, e.g. void.
There are various possibilities to log on to or off the Vectron POS
ColorTouch.

7.1.1 Log on with key

You log on to the Vectron POS ColorTouch by holding the key
to the lock (see above). If an additional secret number has been
programmed, enter this number and confirm with <Enter>.

7.1.2 Log on without key

Log on without key is possible in case you have been assigned a
clerk number. Enter this clerk number and confirm with <Enter>. If
required, enter your secret number and confirm with <Enter>.
Vectron POS ColorTouch