Settings For Tcp/Ip - Lancom 1811 User Manual


The ISDN calling line identity (CLI)
The ISDN caller ID—also known as CLI (Calling Line Identity)—this is the telephone number of
the caller which is transmitted to the participant receiving the call. As a rule, it consists of the
country and area codes and an MSN.
The CLI is well-suited for authentication purposes for two reasons: it is very difficult to manipu-
late, and the number is transferred free of charge via the ISDN control channel (D-channel).
6.1.2

Settings for TCP/IP

Each active RAS user must be assigned an IP address when using the TCP/IP
protocol.
This IP address can be permanently assigned when setting up a user. However,
it is simpler to let the LANCOM Router automatically assign free IP addresses
to users when they dial in. In this case you only need to specify the IP address
range that the LANCOM Router should use for RAS users.
During both manual and automatic IP address assignment, please ensure that
only free addresses from the address range of your local network are used. In
our example, the IP address '10.0.1.101' will be assigned to the PC when con-
necting.
This IP address makes the computer a fully-fledged member of the LAN: with
the appropriate rights, it can access all of the other devices in the LAN. The
LANCOM 1811 Wireless DSL – LANCOM 1821+ Wireless ADSL
Please refer to chapter 'Linking two networks'
about the other values required for the installation of a RAS access.
10.0.1.100
(0123) 123456
Chapter 6: Providing dial- in access
LAN of the head office.
IP: 10.0.1.0
VPN or ISDN
connection
User: 'SAMPLE'
(0123) 777888
→
Page 39 for advice
Remote
workstation
IP:
10.0.1.101
ISDN adapter
55