Korg X50 Operation Manual page 10

Korg x50 music synthesizer operation guide
Hide thumbs Also See for X50:
Table of Contents

Advertisement

Quick Start
Selecting combinations by bank and number
1
1. Press a [COMBI] button. (The button will light.)
You will enter Combination mode. Notice that the upper line of the display indicates
"COMBI 0: Play" (mode name, page number and name).
Mode name
Bank
number
Combi Select
(combination
number and
name)
2. Make sure that "Combi Select" (combination number and name) is selected.
If this is not selected, use the ClickPoint [ π ][ † ] to highlight the "Combi Select" indication.
3. Turn the [VALUE] dial to select the combination you want to play.
4. Press a COMBI BANK [A]–[C] button to switch banks.
When you select a different Bank, the button's LED will light, and the selected bank will
appear on the left side of the display.
For example, to select bank B, press the COMBI BANK [B] button. The [B] button will light,
and the name Bank B will appear in the left of the display.
Combinations are organized into banks of 128. Select the desired bank, and then select a
combination number within that bank.
5. Play the keyboard to hear the combination you selected.
While playing the keyboard, use the [MOD] wheel, [PITCH] wheel, [SW1][SW2], and
realtime controllers to modify the sound. The result will differ depending on the
combination, so play the keyboard while operating these controllers to hear what they do.
Note: You can't use the [AUDITION] button to play a riff (phrase) in Combination mode.
Selecting combinations by category
In Combination mode you can select combinations by category just as in Program mode. For the
procedure, see "Selecting programs by category" ( ☞ p.3).
4
Page number and name
Category number
and name
Tab
3
2
Parameter name
Tempo
Tab name
Control assign list
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents