6. Turn knob  (EG-INTENSITY) to adjust ﬁlter EG intensity (the depth at which the ﬁlter EG
Rotating the knob will affect the depth of the ﬁlter EG. Normally, rotating the knob toward
the left will make the ﬁlter EG apply less deeply, and rotating it toward the right will make
the ﬁlter EG apply more deeply. Since the ﬁlter EG will operate based on the cutoff frequency
of the ﬁlter, knobs  and  will work together to control the tonal changes produced by the
7. Turn knob  (EG-RELEASE) to adjust EG release times of the ﬁlter and amp. This will
determine the time from note-off until the sound disappears.
When you adjust the knob, the release times of the ﬁlter EG and the amp EG will change.
Normally, rotating the knob toward the left will shorten the release time, and rotating it
toward the right will lengthen the release time.
8. Press the REALTIME CONTROLS [SELECT] button to light the "B" LED located at the right
of the button.
In B-mode, effective functions for each of the preloaded programs and combinations are
assigned to the knobs. This lets you use the knobs to control volume, portamento time, pan,
ﬁlter and amp EG, pitch LFO, master effect send levels, and other parameters.
Turn each knob to hear the result.
Note: The B-mode functions for the REALTIME CONTROLS , , , and  knobs can be
viewed for Program mode in the 0: Play, Program page, and for Combination mode in the 0:
Play, Combination page.