Operation; Removing The Battery; Procedure; Charging The Battery - FLIR K Series User Manual

11

Operation

11.1 Removing the battery

11.1.1 Procedure

Follow this procedure:
1. Pull the eccentric latch.
2. Pull out the battery from the battery compartment.

11.2 Charging the battery

11.2.1 General

Charge the battery for 4 hours before starting the camera for the first time, or until the
blue battery condition LED glows continuously.
11.2.2 Procedure
Follow this procedure:
1. Put the battery in the standalone battery charger.
2. Connect the power supply cable plug to the connector on the standalone battery
charger.
3. Connect the power supply mains-electricity plug to a mains socket.
4. Disconnect the power supply cable plug when the blue battery condition LED glows
continuously.
#T559811; r. AE/ 9082/9150; en-US
14