FLIR K Series Notice To End Users

Copyright
© 2013, Flir Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of Flir Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: T559801
Commit: 6533
Head: 6533
Language: en-US
Modified: 2013-02-20
Formatted: 2013-02-20
Corporate Headquarters
Flir Systems, Inc.
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA
Telephone: +1-503-498-3547
Website
http://www.flir.com
Customer support
http://support.flir.com
Legal disclaimer
Specifications subject to change without further
notice. Camera models and accessories subject
to regional market considerations. License
procedures may apply. Products described herein
may be subject to US Export Regulations. Please
refer to exportquestions@flir.com with any
questions.
1 (4)
Notice to customer
Flir K series In-truck charger
Table of contents
1 Introduction .............................................................................................. 1
2 Parts and functions..................................................................................... 2
3 Choosing a suitable position......................................................................... 2
4 Recommended cable area and fuse............................................................... 2
5 Mounting instructions.................................................................................. 3
6 Charging the camera .................................................................................. 3
7 Charging a battery separately ....................................................................... 3
8 Technical data........................................................................................... 3
9 Cleaning .................................................................................................. 4
10 Customer support ...................................................................................... 4
1 Introduction
Thank you for choosing the Flir K series in-truck charger from Flir Systems.
The in-truck charger is intended to be mounted on a flat surface in the cab, in one of the
equipment lockers, or in another suitable compartment on the fire engine. The in-truck
charger has five ports for cable routing—one through the rear of the metal bracket and
one port on each side of the in-truck charger.
The in-truck charger can also be powered using a standard Flir Systems power supply,
and has a battery charger located at the lower front of the unit.
www.flir.com