P Button; Remote Operation Button; Pair Devices - FLIR E-EST Series User Manual

7
Handling the camera

7.5 P button

The P button is used when screening in Operator mode.
You can also assign different functions to the programmable P button, by doing the
following:
1. Push and hold the P button. This displays the Programmable button menu.
2. Push the navigation pad up/down to select one of the functions. Push the center of
the navigation pad to confirm.

7.6 Remote operation button

The Remote operation button is used to trigger the screening in Button mode. The Re-
mote operation button can also be used as an external P button in Operator mode.

7.6.1 Pair devices

Before you can use the Remote operation button with the camera, you need to pair the
devices. See section 10.3.4.1 Pair with the button.
20
#T810583; r. AA/75420/75423; en-US