Viewing Saved Images; General; Procedure - FLIR K Series User Manual

11
Operation

11.6 Viewing saved images

11.6.1 General

When you save an image, the image is stored in the camera's image archive. To display
the image again, you can recall it from the archive.

11.6.2 Procedure

Follow this procedure:
1. Push and hold the Mode button, then push the Zoom button. This will display the
screen below.
2. Select Archive by pushing the Mode button. This will display the screen below.
3. In the image archive, do one of the following:
• Select Next by pushing the Mode button to navigate in the image archive.
• Select Maximize by pushing the Zoom button to enlarge a specific image.
4. Select Exit by pushing the On/off button to exit the image archive.
#T559811; r. AE/ 9082/9150; en-US
21