M86 Security M86 Web Filter User Manual page 99

requirements for LDAP authentication. Please ensure the correct
DNS settings are set.
1. This tab includes the following fields, some pre-popu-
NOTES: If your LDAP server's name is not a resolvable, fully
qualified DNS name, you may be able to enter the domain name.
If using a Novell server, be sure the Server DNS Name exactly
matches the name on the SSL certificate that will be uploaded to
the server.
NOTES: If your LDAP server's name is not a resolvable, fully
qualified DNS name, you may be able to enter the domain name.
If using a Novell server, be sure the DNS Domain Name exactly
matches the name on the SSL certificate that will be uploaded to
the server.
M86 S U G
ECURITY SER UIDE
C 3: LDAP A
HAPTER
lated by default, and some that you may wish to edit:
• The Server DNS Name field should contain the DNS
name of the server. If this field is already populated, it
may need to be edited if there is more than one DNS
server available.
• The Server IP Address that displays by default is the
one that was entered in the LDAP Server IP field of the
Create LDAP Domain dialog box.
• The DNS Domain Name should be the DNS name of
the LDAP domain, such as logo.com, and may need to
be edited if the entire domain name does not display
by default.
• If necessary, the NETBIOS Domain Name can be
entered.
• By default, 636 displays in the Server LDAPS Port
field.
• By default, the value that was entered in the LDAP
Server Port field of the Create LDAP Domain dialog
box displays in the Server LDAP Port field.
S
UTHENTICATION ETUP
C LDAP D
REATE AN OMAIN
87