M86 Authenticator Configuration Priority; Windows - M86 Security M86 Web Filter User Manual

M86 Authenticator configuration priority

The source and order in which parameters are received and
override one another are described below.
NOTES: The RA[] parameter for the Web Filter IP address is the
only parameter that must be configured.
Any parameter set at the end of the list will override any param-
eter that was previously set.

Windows

1. Compiled Defaults: Given no parameters at all, the
2. Configuration File (optional): The default location of the
3. Command Line (optional): Options on the command line
4. Web Filter Configuration Packet (optional): The Web
M86 S U G
ECURITY SER UIDE
A
PPENDIX
client will try to execute using the default compilation.
configuration file is the same path/name as the authen-
ticat.exe client, but with a ".cfg" extension instead of
".exe". The full path/name can be specified on the
command line with the CF[] parameter. Review the ++
comment following Table 1 for more information.
will override compiled defaults and the configuration file.
The command line can be left blank.
Filter may send a configuration packet that will override
all other settings, including the command line. If the Web
Filter changes the IP address or port used by authen-
ticat.exe, then when authenticat.exe reconnects, authen-
ticat.exe will use the new IP address and port.
A: A O
UTHENTICATION PERATIONS
M86 A
UTHENTICATOR
201