M86 Authenticator Configuration Syntax; Sample Command Line Parameters; Sample Configuration File - M86 Security M86 Web Filter User Manual

M86 Authenticator configuration syntax

All configuration parameters, regardless of their source, will
use the following format/syntax:

Sample command line parameters

Sample configuration file

NOTE: On a Macintosh, the LF[] parameter is ignored. Log files
are always placed in the user's home folder under ~/Library/Logs/
8e6authenticator.log. To view the logs, either the OS X Console
application or the UNIX "tail" command can be used.
M86 S U G
ECURITY SER UIDE
A
PPENDIX
wAA[B]w{C}w
{Parameter 'AA' with Data 'B', and Comment 'C' ignored.}
w;DD[E]w{C}w
{The semicolon causes 'DD[E]' to be ignored, 'C' is also ignored.}
Whereas 'AA' is a two-letter, case-insensitive parameter
name, 'B' is the value for this parameter wrapped in
brackets ( [ ] ), and 'w' is zero or more white spaces
(space, tab, carriage return, line feed). 'C' is completely
ignored, and anything wrapped in braces ( { } ) is consid-
ered a comment. A ';' immediately preceding a param-
eter will cause that parameter and its data to be ignored,
which is convenient for temporarily reverting a parameter
to default values during testing.
authenticat.exe LF[c:\] ra[192.168.0.43]Rr[40000]
RA[100.10.101.30] { Web Filter Virtual IP address }
RP[139] { Web Filter Port }
RH[30000] { Heartbeat timer (30 seconds) }
RR[30000] { Reconnect time (before connecting again) }
RC[10000] { Connect Timeout (how long to wait for a connection
response) }
LE[0]
LF[\\100.10.101.117\publogs\] { Where to put logs }
A: A O
UTHENTICATION PERATIONS
M86 A
UTHENTICATOR
203