M86 Security M86 Web Filter User Manual page 95

1. Generally, no action needs to be performed on this tab.
2. Based on the selected server type, the following
NOTE: If the options for "Use Dynamic Group" and "Use Nested
Group" are both available, M86 recommends using nested
groups over dynamic groups for optimum performance of the
Web Filter.
M86 S U G
ECURITY SER UIDE
C 3: LDAP A
HAPTER
However, under special circumstances, the following
actions can be performed:
• A group object can be added or excluded by making an
entry in the appropriate field, and then clicking the
Include or Exclude button.
• A group object name can be edited by selecting the
group object from the appropriate list box, editing the
name in the field, and then clicking the Edit button.
• A group object can be removed by selecting the group
object and then clicking Remove.
checkbox(es) is/are available for specifying a particular
group profile assignment, if necessary:
• If using Active Directory, the "Use Primary Group"
checkbox displays on this tab. You may wish to check
this box to indicate that profiles based on user groups
should be assigned to users.
• If using Novell eDirectory or Sun One, the "Use
Dynamic Group" checkbox displays on this tab. You
may wish to check this box to indicate that profiles
based on dynamic groups should be assigned to
users.
• If using Active Directory Native mode, Sun One, Novell
eDirectory, or Open Directory, the "Use Nested Group"
checkbox displays on this tab. This feature saves you
time when configuring policies. After the group policy is
configured, all sub-groups within that group will use the
same policy and do not need to be configured, unless
a special policy is required for a sub-group and that
policy is given a higher priority than the group policy.
S
UTHENTICATION ETUP
C LDAP D
REATE AN OMAIN
83