Group Objects - M86 Security M86 Web Filter User Manual

C 3: LDAP A
HAPTER UTHENTICATION
82
S C
ETUP
WARNING: The contents of the tabs for User and Group do not
normally need to be changed. The settings on these tabs are
made automatically when you select the server type at the begin-
ning of the setup process. Unless you
Schema of your LDAP server and are sure of the consequences
of altering these settings, do not alter anything in these tabs. The
only action you need to execute on these tabs is to confirm the
settings by clicking the Next button at the bottom of the window,
until you reach the Address tab.

Group Objects

The Group tab is used for including or excluding group
objects in the LDAP domain.
Fig. 3-3 Domain Details window, Group tab
By default, this tab is populated as follows:
• The Include List is populated with appropriate group
objects, based on the server type.
• The Membership Attribute field is populated with the
name of the LDAP attribute from the group record that
identifies members of the group.
LDAP D
REATE AN OMAIN
have made changes to the
M86 S U
ECURITY
G
SER UIDE