Test net use based authentication settings
1. From the test workstation, go to the NET USE command
TIP: The virtual IP address should be the same as the one
entered in the Virtual IP Address to Use for Authentication field in
the Authentication Settings window (see Chapter 2: Network
Setup, Enter network settings for authentication).
2. Make a Web request to a site you can access, based on
The test process has been completed successfully if you
are now able to access the content for the URL you entered
at
step 2 in this section.
M86 S
U
G
ECURITY
SER
UIDE
C
5: A
HAPTER
UTHENTICATION
line and enter the NET USE command using the
following format: NET USE \\virtualip\R3000$
For example: NET USE \\192.168.0.20\R3000$
The entry you make should initiate a connection with Tier
1.
your filtering profile.
D
T
A
EPLOYMENT
EST
UTHENTICATION
S
ETTINGS
151