Test Web-based authentication settings
To verify that authentication is working properly, make the
following settings in the Policy section of the console:
Step 1: Create an IP Group, "test"
1. Click the IP branch of the tree.
2. Select Add Group from the pop-up menu to open the
3. Enter test as the Group Name.
4. Enter the password in the Password and Confirm Pass-
5. Click OK to add the group to the tree.
Step 2: Create a Sub-Group, "workstation"
1. Select the IP Group from the tree.
2. Click Add Sub Group in the pop-up menu to open the
M86 S
U
G
ECURITY
SER
UIDE
C
5: A
HAPTER
UTHENTICATION
Create New Group dialog box:
Fig. 5-2 Create New Group box
word fields.
Create Sub Group dialog box:
Fig. 5-3 Create Sub Group box
D
T
A
EPLOYMENT
EST
UTHENTICATION
S
ETTINGS
143