Net Use Based Authentication - M86 Security M86 Web Filter User Manual

C 2: N
HAPTER ETWORK
42
S S N
ETUP ET UP THE
feature, turn "On" the AD Agent, and then specify
settings for administrator computers authorized to
configure the AD Agent via the Active Directory Agent
console. Download and install the AD Agent
(DCAgent.msi) on the administrator workstation.
5. If using Tier 1, in the Sending Keep Alive frame, click
"On" to specify that keep alives should be sent on a
connection to verify whether it is still active. Click "Off" to
specify that the end user's session will be kept alive
based on the number of minutes entered in the text box.
6. Click Apply.

Net use based authentication

Tier 1: Web-based Authentication disabled (Net Use
enabled) – Choose this option if you will be using net use
based authentication for Active Directory.
1. Click "Tier 1".
2. In the Sending Keep Alive frame, click the radio button
corresponding to the option to be used:
• "On" - This option specifies that keep alives should be
sent on a connection to verify whether it is still active.
• "Off" - This option specifies that the end user's session
will be kept alive based on the number of minutes
entered in the text box.
In the Inactive session lifetime (in minutes) field,
enter the number of minutes the end user's session will
be kept alive.
3. Click Apply to open the alert box that confirms your
selection.
A
ETWORK FOR UTHENTICATION
M86 S U G
ECURITY SER UIDE