Table of Contents
Advertisement
L-R Phase (LFO L-R Phase)
Sets the LFO phase difference between the left and right
L Delay (L Delay Time)
R Delay (R Delay Time)
HiDamp (High Damp)
Sets the damping amount in the high range
L Fdback (L Feedback)
Sets the feedback amount for the left channel
R Fdback (R Feedback)
Sets the feedback amount for the right channel
Dry:Wet
Sets the balance between the effect and dry sounds
In Level (Input Level)
: Oscillator Frequency [Hz]
This parameter sets the oscillator frequency.
30: Rotary Speaker
This effect simulates a rotary speaker, and obtains a more re-
alistic sound by simulating the rotor in the low range and the
horn in the high range separately. The effect also simulates
the stereo microphone settings.
Speed Sw (Speed Switch)
Switches the speaker rotation speed between slow and fast
HornRatio (Horn Ratio)
Adjusts the (high-range side) horn rotation speed. Standard
value is 1.00. Selecting "Stop" will stop the rotation
RotorRatio (Rotor Ratio)
Adjusts the (low-range side) rotor rotation speed. Standard value
is 1.00. Selecting "Stop" will stop the rotation
Rotor:Horn (Horn:Rotor Balance)
Sets the level balance between the high-range horn and low-
Rotate Sw (Rotate Switch)
Switches between speaker rotation and stop
HrnAccel (Horn Acceleration)
How quickly the horn rotation speed in the high range is
RtrAccel (Rotor Acceleration)
Determines how quickly the rotor rotation speed in the low
MicDistance
Sets the distance between the microphone and rotary speaker
MicSpread
Sets the angle of left and right microphones
Dry:Wet
Sets the balance between the effect and dry sounds
: Horn Acceleration, : Rotor Acceleration
On a real rotary speaker, the rotation speed is accelerated or
decelerated gradually after you switch the speed. The "Horn
Acceleration" parameter sets the speed at which the rotation is
accelerated or decelerated.
: MicDistance, : MicSpread
This is a simulation of stereo microphone settings.
–180...+180deg
0...2.730sec
Sets the left delay time
0...2.730sec
Sets the right delay time
53Hz...20.0kHz, THRU
–100...+100%
–100...+100%
Dry, 1:99...99:1, Wet
0...100%
Sets the input level to the effect
Slow, Fast
Stop, 0.50...2.00
Stop, 0.50...2.00
Rotor, 1:99...99:1, Horn
range rotor
Rotate, Stop
0...100
switched
0...100
range is switched
0...100
0...100%
Dry, 1:99...99:1, Wet
Monaural-type
Category
No. Name
Reverb&Delay
31 Mono Reverb Hall
32 Mono Reverb Plate
33 Mono Reverb Room
34 Mono ER
35 Mono Delay
36 Mn.Multitap Delay
Modulation&Pitch
37 Mono Chorus
38 Mono Flanger
39 Mono Phaser
40 Mono Tremolo
41 Mn.Pitch Shifter
Dynamics&Filter
42 Mono Compressor
43 Mono Limiter
44 Mono Expander
45 Mono Gate
46 Mono Filter
47 Mono Wah
SFX&etc
48 AnalogRecord
49 Mn.Ring Modulator
50 Tube Pre Amp Sim
51 Mic Simulator
Multi
52 GuitarMulti
Category: Reverb&Delay
Reverb/delay-type effects
31: Mono Reverb Hall
32: Mono Reverb Plate
Rev Time (Reverb Time)
LoDamp (Low Damp)
Sets the damping amount in the low range
HiDamp (High Damp)
Sets the damping amount in the high range
Dry:Wet
Sets the balance between the effect and dry sounds
SideRflct (Side Reflection)
Sets the amount of reflections from the side walls
BackRflct (Back Reflection)
Sets the amount of reflection from the back wall
33: Mono Reverb Room
Rev Time (Reverb Time)
LoDamp (Low Damp)
Sets the damping amount in the low range
HiDamp (High Damp)
Sets the damping amount in the high range
Dry:Wet
Sets the balance between the effect and dry sounds
SideRflct (Side Reflection)
Sets the amount of reflections from the side walls
BackRflct (Back Reflection)
Sets the amount of reflection from the back wall
Size
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
8
0.1...10.0sec
Sets the reverberation time
THRU, 21Hz...8.00kHz
53Hz...20.0kHz, THRU
Dry, 1:99...99:1, Wet
0...100%
0...100%
0.1...3.0sec
Sets the reverberation time
THRU, 21Hz...8.00kHz
53Hz...20.0kHz, THRU
Dry, 1:99...99:1, Wet
0...100%
0...100%
159
Hide quick links:
Advertisement
Table of Contents
