Start Recording; Playback - Korg D3200 Owner's Manual

Start recording

The location currently shown in the counter is where the recording will begin.
(→p.37 "2. Location")
(1) Set the D3200 to record-ready.
Press the REC key (the key will blink).
(2) Press the PLAY key.
The D3200 will begin recording, both the REC and PLAY keys will
light.
(3) Begin playing your instrument.
(4) When you have finished playing, press the STOP key to stop recording (the
keys will go dark).
The track view will display a bold line to indicate the region where recording took
place. This line indicates the event data. Event data is displayed even for recorded
areas where you did not actually play your instrument.

6. Playback

(1) Set channel 1 to play.
Turn the REC/PLAY key on. Then press the channel key of track 1 (the track
you just recorded) to set it to Play (key lit green).
(2) Return to the beginning of the song.
Hold down the STOP key and press the REW key to return to the beginning
of the song (→p.37 "2. Location").
(1)
(3) Press the PLAY key to begin playback (the key will light).
• You can apply EQ to the playback audio (→p.46 "Applying EQ to the play-
back").
• You can adjust the level and pan of the playback audio (→p.45 "3-1. Adjust-
ing the volume," →p.45 "3-2. Adjusting the pan").
• You can apply effects to the playback audio (→p.54 "Effects").
• You can play internal rhythms along with the playback (→p.58 "Session
Drums™").
(4) Press the STOP key to stop the playback (the PLAY key goes dark).
Even if there is no event data, playback will not stop until you press the STOP key.
26
(1)
(2)
(2)(4) (3)
(4) (2) (1)