2E. Send (Eff/Aux/Rec); 2E-1. Effect 1 Send; 2E-2. Effect 2 Send; 2E-3. Aux1 Send - Korg D3200 Owner's Manual

2e. SEND (EFF/AUX/REC)

2e-1. Effect 1 Send

You can adjust the send levels from each mixer channel to
master effect 1.
If you select the pre-fader setting (PRE), the signal will be
sent to the master effect from immediately before the fader,
regardless of the fader level.
With the pre-fader setting, the signal is sent to the master ef-
fect at the same level as when the post-fader (PST) setting is
used with the fader level set to unity (0 dB).
1
2
1. SEND
Adjusts the send level. Use the Knob Matrix to adjust the
setting.
2. PRE/PST
This specifies whether the signal will be sent at the level
immediately before the fader (Pre Fader) or the level
immediately after the fader (Post Fader).
PRE: Send the pre-fader level
PST: Send the post-fader level
3. LEVEL meter
Indicates the level of the Effect 1 Send bus and Effect 1
Return L/R bus.
4. Select All
This links the operation of all channels.
It will link the PRE/PST buttons and the SEND knobs.

2e-2. Effect 2 Send

Here you can adjust the send levels from each mixer channel
to master effect 2.
For details on the parameters, refer to the section above, "2e-
1. Effect 1 Send."

2e-3. Aux1 Send

You can adjust the send levels from each mixer channel to the
AUX OUT 1 jack.
If you select the pre-fader setting (PRE), the signal from im-
mediately before the fader will be sent to the AUX OUT jack
regardless of the fader level.
With the pre-fader setting, the signal is sent to the AUX OUT
jack at the same level as when the post-fader (PST) setting is
used with the fader level set to unity (0 dB).
For details on connecting and using external effects, refer to
p.57.
1
2
3
4
1. SEND
Adjusts the send level. Use the Knob Matrix to adjust the
setting.
2. PRE/PST
This specifies whether the signal will be sent at the level
immediately before the fader (Pre Fader) or the level
immediately after the fader (Post Fader).
PRE: Send the pre-fader level
PST: Send the post-fader level
3. AUX1 Send meter
Indicates the level of the AUX1 Out.
4. Select All
This links the operation of all channels.
It will link the PRE/PST buttons and the SEND knobs.
5. AUX1 LEVEL
Adjusts the level of the AUX1 Out.

2e-4. Aux2 Send

Here you can adjust the send level that is output from each
mixer channel to the AUX 2 jack.
For details on the parameters, refer to the section above, "2e-
3. Aux1 Send."
3
4
5
109